Docker edition Al fresco install problem

cancel
Showing results for 
Search instead for 
Did you mean: 
fedorow
Senior Member

Re: Docker edition Al fresco install problem

Jump to solution

Images pulled from hub one time and you can use it local copies until you remove it. List of images

sudo docker images

Docker deployment simple and powerful, but it's important to understand the concept, how it works.

I can suggest you read about docker/docker-compose in general and this articles about Alfresco deployment:

Deploying Alfresco Content Services Community using Docker Compose

https://community.alfresco.com/community/ecm/blog/2018/11/14/deploying-and-running-alfresco-content-...

deepakdeshp
Member II

Re: Docker edition Al fresco install problem

Jump to solution

Thank yo Serge, without your help I would not have installed the docker edition successfully.

deepakdeshp
Member II

Re: Docker edition Al fresco install problem

Jump to solution

I am able to start Alfresco with sudo docker-compose up.

But my server becomes so slow that even terminal stops to respond, I cant even ssh to it.

It is running as a Ubuntu 18.04 VM guest. The host is Mint 19.2. The system becomes u

Mint configuration is 

inxi -Fxz
System:
Host: mint-18-uma Kernel: 5.0.21-050021-generic x86_64 bits: 64
compiler: gcc v: 8.3.0 Desktop: Cinnamon 4.2.4
Distro: Linux Mint 19.2 Tina base: Ubuntu 18.04 bionic
Machine:
Type: Laptop System: Hewlett-Packard product: HP Notebook
v: Type1ProductConfigId serial: <filter>
Mobo: Hewlett-Packard model: 80CC v: 99.53 serial: <filter> UEFI: Insyde
v: F.28 date: 05/17/2019
Battery:
ID-1: BAT1 charge: 28.7 Wh condition: 30.5/30.5 Wh (100%)
model: 131-42-6E HS04041 status: Unknown
CPU:
Topology: Quad Core model: AMD A8-7410 APU with AMD Radeon R5 Graphics
bits: 64 type: MCP arch: Puma rev: 1 L2 cache: 2048 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
bogomips: 17568
Speed: 2352 MHz min/max: 1000/2200 MHz Core speeds (MHz): 1: 2310 2: 2305
3: 2230 4: 2278
Graphics:
Device-1: AMD Mullins [Radeon R4/R5 Graphics] vendor: Hewlett-Packard
driver: radeon v: kernel bus ID: 00:01.0
Device-2: AMD Sun XT [Radeon HD 8670A/8670M/8690M / R5 M330 / M430 / R7
M520]
vendor: Hewlett-Packard driver: radeon v: kernel bus ID: 01:00.0
Display: x11 server: X.Org 1.19.6 driver: ati,radeon
unloaded: fbdev,modesetting,vesa resolution: 1366x768~60Hz
OpenGL:
renderer: AMD MULLINS (DRM 2.50.0 5.0.21-050021-generic LLVM 8.0.0)
v: 4.5 Mesa 19.0.8 direct render: Yes
Audio:
Device-1: AMD Kabini HDMI/DP Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus ID: 00:01.1
Device-2: AMD FCH Azalia vendor: Hewlett-Packard driver: snd_hda_intel
v: kernel bus ID: 00:14.2
Sound Server: ALSA v: k5.0.21-050021-generic
Network:
Device-1: Realtek RTL8723BE PCIe Wireless Network Adapter
vendor: Hewlett-Packard driver: rtl8723be v: kernel port: 3000
bus ID: 02:00.0
IF: wlo1 state: up mac: <filter>
Device-2: Realtek RTL810xE PCI Express Fast Ethernet
vendor: Hewlett-Packard driver: r8169 v: kernel port: 2000 bus ID: 03:00.0
IF: enp3s0 state: down mac: <filter>
IF-ID-1: vmnet1 state: unknown speed: N/A duplex: N/A mac: <filter>
IF-ID-2: vmnet8 state: unknown speed: N/A duplex: N/A mac: <filter>
Drives:
Local Storage: total: 465.76 GiB used: 125.90 GiB (27.0%)
ID-1: /dev/sda vendor: HGST (Hitachi) model: HTS545050A7E680
size: 465.76 GiB
Partition:
ID-1: / size: 145.55 GiB used: 71.13 GiB (48.9%) fs: ext4 dev: /dev/sda7
ID-2: swap-1 size: 4.98 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda8
Sensors:
System Temperatures: cpu: 64.0 C mobo: N/A
Fan Speeds (RPM): N/A
GPU: device: radeon temp: 49 C device: radeon temp: 63 C
Info:
Processes: 258 Uptime: 3m Memory: 6.75 GiB used: 1.60 GiB (23.7%)
Init: systemd runlevel: 5 Compilers: gcc: 7.4.0 Shell: bash v: 4.4.20
inxi: 3.0.32

The guest is

inxi -Fxz
System: Host: mail.test.com Kernel: 4.15.0-58-generic x86_64
bits: 64 gcc: 7.4.0
Console: tty 0 Distro: Ubuntu 18.04.3 LTS
Machine: Device: vmware System: VMware product: VMware Virtual Platform serial: N/A
Mobo: Intel model: 440BX Desktop Reference Platform serial: N/A
BIOS: Phoenix v: 6.00 date: 04/13/2018
CPU: Single core AMD A8-7410 APU with AMD Radeon R5 Graphics (-UP-)
arch: Puma rev.1 cache: 2048 KB

flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3) bmips: 4391 speed: 2195 MHz (max)
Graphics: Card: VMware SVGA II Adapter bus-ID: 00:0f.0
Display Server: N/A driver: vmwgfx
tty size: 80x24 Advanced Data: N/A out of X
Audio: Card Ensoniq ES1371/ES1373 / Creative Labs CT2518
driver: snd_ens1371 port: 2040 bus-ID: 02:02.0
Sound: Advanced Linux Sound Architecture v: k4.15.0-58-generic
Network: Card: Intel 82545EM Gigabit Ethernet Controller (Copper)
driver: e1000 v: 7.3.21-k8-NAPI port: 2000 bus-ID: 02:01.0
IF: ens33 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: HDD Total Size: 42.9GB (67.6% used)
ID-1: /dev/sda model: VMware_Virtual_S size: 42.9GB
Partition: ID-1: / size: 37G used: 28G (79%) fs: ext4 dev: /dev/sda1
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: None detected - is lm-sensors installed and configured?
Info: Processes: 205 Uptime: 4 min Memory: 681.5/3921.5MB
Init: systemd Gcc sys: 7.4.0
Client: Shell (bash 4.4.201) inxi: 2.3.56
uma@mail:~$

deepakdeshp
Member II

Re: Docker edition Al fresco install problem

Jump to solution

When I  try login to http://server:8080/share I get 504 Gateway timeout. Other applications are running on server and those urls like http://server/en/omk/open-audit/login work without a problem.

fedorow
Senior Member

Re: Docker edition Al fresco install problem

Jump to solution

Alfresco docker-compose deployment minimum memory requirement is 12GB. It can starts on 8GB, but without any others application. 

You use VM with 4GB memory. So try to start it directly on your 8Gb mint or take bigge vm.

View solution in original post

deepakdeshp
Member II

Re: Docker edition Al fresco install problem

Jump to solution

The docker container is installed in Ubuntu vmware server which runs as a guest. Can I copy it to the Mint 19.2 host so that I dont need to download the software once again.

Which of these methods do you recommend? https://bobcares.com/blog/move-docker-container-to-another-host/