[Resolu] Installer Alfresco pour utiliser port 8443 (https)

cancel
Showing results for 
Search instead for 
Did you mean: 
alf_2095
Member II

[Resolu] Installer Alfresco pour utiliser port 8443 (https)

Bonjour,
J'ai installé Alfresco 3.2r et j'utilise déjà en http sur le port 8888 (8080 était occupé par une autre application).
Mon problème est que je n'arrive pas l'utiliser en HTTPS.
y a-t-il des fichiers à modifier? des lignes à décommenter?

Merci de me situer ou de me donner des liens de Post pouvant m'aider.

NB: Lors de mon installation sous Win Vista, il m'a pas été demandé de choisir mon mode d'utilisation (http ou https).

Ps: Je cherche encore sur ce forum un post qui pourrait répondre à mon besoin.
6 Replies
rguinot
Customer

Re: [Resolu] Installer Alfresco pour utiliser port 8443 (https)

N'est pas lié à la configuration de l'appli Alfresco, mais à la config du serveur d'applications utilisé , et si nécessaire du serveur web placé en frontal
regardez la conf des connecteurs Tomcat dans conf/server.xml pour exemple
alf_2095
Member II

Re: [Resolu] Installer Alfresco pour utiliser port 8443 (https)

Merci rguinot pour ta réponse.
Quelles modifications dois-je faire dans ce fichier?

j'ai décommenté le bloc ci-dessous dans server.xml et redemaré le serveur, mais rien.
    
    <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true"
               maxThreads="150" scheme="https" secure="true"
               clientAuth="false" sslProtocol="TLS" />

Les topics que j'ai pu lire sur cette question ne me disent pas les paramètres à modifier. Pouvez-vous me donner encore un coup de pousse?
Ci-dessous le contenu de mon fichier web.xml :
<?xml version='1.0' encoding='utf-8'?>
<!–
  Licensed to the Apache Software Foundation (ASF) under one or more
  contributor license agreements.  See the NOTICE file distributed with
  this work for additional information regarding copyright ownership.
  The ASF licenses this file to You under the Apache License, Version 2.0
  (the "License"); you may not use this file except in compliance with
  the License.  You may obtain a copy of the License at

      http://www.apache.org/licenses/LICENSE-2.0

  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
–>
<!– Note:  A "Server" is not itself a "Container", so you may not
     define subcomponents such as "Valves" at this level.
     Documentation at /docs/config/server.html
–>
<Server port="8005" shutdown="SHUTDOWN">

  <!–APR library loader. Documentation at /docs/apr.html –>
  <!– <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> –>
  <!– <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> –>
  <!–Initialize Jasper prior to webapps are loaded. Documentation at /docs/jasper-howto.html –>
  <Listener className="org.apache.catalina.core.JasperListener" />
  <!– JMX Support for the Tomcat server. Documentation at /docs/non-existent.html –>
  <Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
  <Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />

  <!– Global JNDI resources
       Documentation at /docs/jndi-resources-howto.html
  –>
  <GlobalNamingResources>
    <!– Editable user database that can also be used by
         UserDatabaseRealm to authenticate users
    –>
    <Resource name="UserDatabase" auth="Container"
              type="org.apache.catalina.UserDatabase"
              description="User database that can be updated and saved"
              factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
              pathname="conf/tomcat-users.xml" />
  </GlobalNamingResources>

  <!– A "Service" is a collection of one or more "Connectors" that share
       a single "Container" Note:  A "Service" is not itself a "Container",
       so you may not define subcomponents such as "Valves" at this level.
       Documentation at /docs/config/service.html
   –>
  <Service name="Catalina">
 
    <!–The connectors can use a shared executor, you can define one or more named thread pools–>
    <!–
    <Executor name="tomcatThreadPool" namePrefix="catalina-exec-"
        maxThreads="150" minSpareThreads="4"/>
    –>
   
   
    <!– A "Connector" represents an endpoint by which requests are received
         and responses are returned. Documentation at :
         Java HTTP Connector: /docs/config/http.html (blocking & non-blocking)
         Java AJP  Connector: /docs/config/ajp.html
         APR (HTTP/AJP) Connector: /docs/apr.html
         Define a non-SSL HTTP/1.1 Connector on port 8888
    –>
    <Connector port="8888" protocol="HTTP/1.1" URIEncoding="UTF-8"
               connectionTimeout="20000"
               redirectPort="8443" />
    <!– A "Connector" using the shared thread pool–>
    <!–
    <Connector executor="tomcatThreadPool"
               port="8888" protocol="HTTP/1.1"
               connectionTimeout="20000"
               redirectPort="8443" />
    –>          
    <!– Define a SSL HTTP/1.1 Connector on port 8443
         This connector uses the JSSE configuration, when using APR, the
         connector should be using the OpenSSL style configuration
         described in the APR documentation –>
   
    <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true"
               maxThreads="150" scheme="https" secure="true"
               clientAuth="false" sslProtocol="TLS" />
   

    <!– Define an AJP 1.3 Connector on port 8009 –>
   <!–
    <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" />
   –>

    <!– An Engine represents the entry point (within Catalina) that processes
         every request.  The Engine implementation for Tomcat stand alone
         analyzes the HTTP headers included with the request, and passes them
         on to the appropriate Host (virtual host).
         Documentation at /docs/config/engine.html –>

    <!– You should set jvmRoute to support load-balancing via AJP ie :
    <Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1">        
    –>
    <Engine name="Catalina" defaultHost="localhost">

      <!–For clustering, please take a look at documentation at:
          /docs/cluster-howto.html  (simple how to)
          /docs/config/cluster.html (reference documentation) –>
      <!–
      <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/>
      –>       

      <!– The request dumper valve dumps useful debugging information about
           the request and response data received and sent by Tomcat.
           Documentation at: /docs/config/valve.html –>
      <!–
      <Valve className="org.apache.catalina.valves.RequestDumperValve"/>
      –>

      <!– This Realm uses the UserDatabase configured in the global JNDI
           resources under the key "UserDatabase".  Any edits
           that are performed against this UserDatabase are immediately
           available for use by the Realm.  –>
      <Realm className="org.apache.catalina.realm.UserDatabaseRealm"
             resourceName="UserDatabase"/>

      <!– Define the default virtual host
           Note: XML Schema validation will not work with Xerces 2.2.
       –>
      <Host name="localhost"  appBase="webapps"
            unpackWARs="true" autoDeploy="true"
            xmlValidation="false" xmlNamespaceAware="false">

        <!– SingleSignOn valve, share authentication between web applications
             Documentation at: /docs/config/valve.html –>
        <!–
        <Valve className="org.apache.catalina.authenticator.SingleSignOn" />
        –>

        <!– Access log processes all example.
             Documentation at: /docs/config/valve.html –>
        <!–
        <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" 
               prefix="localhost_access_log." suffix=".txt" pattern="common" resolveHosts="false"/>
        –>

      </Host>
    </Engine>
  </Service>
</Server>
Merci d'avance.
rguinot
Customer

Re: [Resolu] Installer Alfresco pour utiliser port 8443 (https)

La doc tomcat donne un tutorial pour la configuration SSL :
http://tomcat.apache.org/tomcat-6.0-doc/ssl-howto.html
alf_2095
Member II

Re: [Resolu] Installer Alfresco pour utiliser port 8443 (https)

Merci rguinot,
Mon problème est résolu.

Autre lien pour ceux qui ont du mal à lire et comprendre en anglais : http://java4it.blogspot.com/2007/01/how-to-configurer-tomcat-avec-https.html
dranakan
Active Member

Re: [Resolu] Installer Alfresco pour utiliser port 8443 (https)

Hello,

Merci pour ces liens, très utiles. J'ai testé, cela fonctionne.

Nous avons pour but d'utiliser le https en interne avec Alfresco. Tout va bien avec Firefox, mais avec Explorer 8, il y a une multitude de messages d'erreurs à confirmer (ils apparaissent car le certificat n'est pas signé par une autorité de certification telle que : Verisign, Thawte, etc.)

Est-il possible, sans recourir aux autorités de certification, de pouvoir utiliser l'https en interne sans transformer Explorer en sapin de Noël ?

J'ai tenté d'ajouter le serveur dans les sites de confiances, mais cela ne change rien…

Merci.
dranakan
Active Member

Re: [Resolu] Installer Alfresco pour utiliser port 8443 (https)

C'est bon…

Pour éviter le problème, il faut impérativement que le certificat ait le même nom (délivré à) que le nom du serveur (nom d'adresse que l'on inscrit dans le navigateur)